Clug Bike Clip Indoor & Outdoor Bicycle

• It's the world's smallest bike rack! The CLUG has been designed to hold your bike securely by the tire without damaging your sidewalls or putting too much pressure on the rims. Store your bike neatly with the tiny bike rack that works with your floor.
• Clug your bike vertically or horizontally, with all necessary hardware included. The Roadie and Hybrid come with anchors for mounting into drywall. MTB, MTB XL, and XXL PLUS need to be mounted into studs, brick, concrete, etc. Not a hanging bicycle rack.
• Available in five sizes to fit most bikes. Size ranges are based on tire width. Make sure to order the correct size for your tires. If the CLUG is too big, your bike may slip out of it. Too small, and your bike won't fit.
• Drill holes if mounting the CLUG on anything other than a wood surface or a stud in the wall. Just affix the template guide to the wall with tape and drill right through the guide. Insert the included anchors into the holes, and you’re ready to roll.
• Organizes space and increasea usable floor area with this minimal profile storage system. Great for all kinds of living arrangements, from studio apartments to duplexes, and even freestanding single family homes! Anywhere space is a a premium.

From the manufacturer Choose the Right CLUG Based on your Bike Tires

Store your bicycle neatly with the tiny bike rack that works with your floor to hold it vertical and securely in place. Save floor space and add to the décor of your home or garage.

Sturdy, attractive & mounts directly onto a wall. Note that CLUG is not a hanging bike rack, it works with at least one tire in contact with the ground. This elegant, easy cycle storage solution means just one clip is all you need, sized perfectly for your bike’s tires.

• The Roadie and Hybrid come with drywall anchors and can be mounted into the drywall.
• The larger MTB, MTB XL, and XXL PLUS are recommended mounted into studs, brick, concrete, etc.

Tire Type Designed to fit skinny tires of road, urban fixies, touring, and race bikes. Designed for hybrid, gravel, and comfy commuter bikes. Designed for mountain bikes with fat, knobby tires. Designed for mountain bikes with ultimate trail shredding tires. Designed for mountain bikes with plus size tires Tire Size Range 1 - 1.25 in | 23 - 32 mm 1.3 - 1.7 in | 33 - 43 mm 1.75 - 2.25 in | 44 - 57 mm 2.3 - 2.7 in | 58 - 69 mm 2.75 - 3.2 in | 70 - 81 mm Drywall Installation ✓ ✓ Brick, Concrete, or Stud Installation ✓ ✓ ✓ ✓ ✓ Product Size 1.6 x 1.6 x 1.4 in 2.2 x 2.2 x 1.6 in 3.2 x 3.2 x 2 in 3.7 x 3.7 x 2.16 in 3.9 x 3.9 x 2.16 in Available Colors White & Orange, White & Black White & Orange, White & Black, Black & Black White & Orange, White & Black White & Orange, White & Black White & Orange, White & Black Follow all Instructions when Installing and Using your CLUG Step 1: Measure your Tire

Do NOT rely on manufacturers' stated tire width!

Watch our short video "How to measure your tire" for instructions on how to correctly measure your inflated bike tire.

Step 2: Line up your Bike

Mark slightly above the center line of the wheel.

Step 3: Drill Holes & Insert Anchors

Affix the template guide lightly to the wall with tape and drill right through the guide. Insert the anchors into the holes, and you’re ready to roll.

• All necessary hardware is included.

Step 4: Install Clipper & Snap on Gripper

Once installed, Clug should sit above the mid-point of the wheel.

Tires must be inflated.

CLUG Works with Your Floor to Hold the Bike Securely in Place

Utilize the CLUG with a wide range of bike tires, road bikes and trail bikes alike. Since it works with your floor, very little weight is placed on it directly. And remember: the CLUG is not designed to act like a traditional hanging bike rack!